iTero Intraoral Scanner

Call Website

iTero Intraoral Scanner Your official connection to iTero™ Intraoral Scanner & digital imaging in Europe, United Kingdom, Norway and Switzerland.

This page is intended for HCP (Healthcare Professionals Only).

10/20/2026

One scanner, (almost) limitless use cases.

What parts of your workflow does your iTero Lumina™ scanner touch? For Blackhart Dentistry, the answer is: most of them. Restorative, Invisalign® treatment, implants, diagnostic comparisons, patient education, all captured with the same iTero Lumina™ scanner already sitting in the clinic.

We designed the iTero Lumina scanner with all the capabilities to support the work you do, and we love seeing it show up across this many parts of a single workflow. It's a true scanner of all trades. 😊

Where does your iTero Lumina scanner show up in your workflow? Let us know in the comments.

09/28/2026

Make oral health assessments clearer for your patients with the latest innovations on the Align™ Oral Health Suite. Align X-Ray Insights* use AI‑enabled, color‑coded insights to help patients better understand their oral health, building trust and supporting treatment acceptance.

Learn more about the innovations here: https://bit.ly/iTero_Align-Innovations



*Align X-ray Insights and X-ray insights are standalone products and are not part of the iTero platform. X-ray Insights is marketed as Align X-ray Insights in regions such as EU, UK and Switzerland.

What would you do with an extra 4.5 minutes saved per case? Every file conversion, manual upload, and extra software ste...
09/24/2026

What would you do with an extra 4.5 minutes saved per case?

Every file conversion, manual upload, and extra software step adds friction to the cases that come through the lab, long before any actual design work begins.

The iTero–exocad Connector™ is designed to close that gap, sending digital scans directly into exocad DentalCAD software with no conversions and no extra steps in between. For lab teams, that translates into real time savings: an average of 4.5 minutes saved per case,¹ and a meaningful reduction in the number of clicks needed to move a case from scan to design.²

See how the connector simplifies the workflow from scan to solution: https://bit.ly/iTero_Practice_Labs



¹ Based on a survey between December 2023 and February 2024 of n=20 dental lab technicians in NA, LATAM, APAC, and EMEA, working with exocad 3.2 Eleusis and the new iTero–exocad Connector™, who were presented with a level of agreement scale from strongly agree to strongly disagree with the following statement: "The iTero–exocad Connector saves me time when compared to the workflow without the iTero–exocad Connector." Data on file at Align Technology, as of February 2024.
² Based on # of clicks required to move a case from the point of receiving an iTero™ scan from a doctor to the point of the scan being loaded in exocad's DentalDB when the user has MyiTero™ and exocad's DentalDB open. Data on file at Align Technology, as of December 17, 2020.

09/23/2026

Full and partial denture scanning can be tough, even for experienced hands.​

Dentures are some of the most challenging cases to capture digitally: wide edentulous arches, mobile soft tissue, and a lack of fixed anatomical landmarks can make it difficult to get a clean, accurate scan on the first pass.

Dr. Todd Davis, a Heartland Dental supported doctor (Heartland Dental), demonstrates his approach to scanning for full and partial denture workflows. In the video above, he walks through his approach to scanning for dentures using the iTero Lumina™ scanner, which offers a 3× larger field of view for capturing more surface area in a single pass,¹ and is designed to scan up to 2× faster than the iTero Element™ 5D imaging system.²​

Watch the video to learn more and pick up a few techniques you can bring into your own denture workflow.



¹ The iTero Lumina™ intraoral scanner offers 3× larger field of view designed for more surface area capture enabling faster scanning. Compared to the field of view of the iTero Element™ 5D imaging system, when the iTero Lumina™ intraoral scanner's scanning distance is 12 mm. Data on file at Align Technology, as of November 15, 2023.
² Compared to the iTero Element™ 5D imaging system with tolerance AVE=±0.1 operating at a working distance from 0–20 mm. Data on file at Align Technology, as of November 15, 2023.
*The speaker featured has been compensated by Align Technology.

09/22/2026

When patients can see their potential future smile, the path forward becomes clearer. Dr. Manal Ibrahim sees it firsthand how Align digital tools can take patient engagement to the next level:

"These digital tools have been a game changer for how I interact with patients. When I can show patients exactly what I see, it helps guide our conversation. It’s now much easier for my patients to understand why treatment is recommended, to visualize the finish line we are going to achieve, and to get excited about starting their Invisalign® clear aligner journey."

Learn more at https://bit.ly/iTero_Align-Innovations.​

09/17/2026

Full and partial denture scanning can be tough, even for experienced hands.​

Dentures are some of the most challenging cases to capture digitally: wide edentulous arches, mobile soft tissue, and a lack of fixed anatomical landmarks can make it difficult to get a clean, accurate scan on the first pass.

Dr. Todd Davis, a Heartland Dental supported doctor (Heartland Dental), demonstrates his approach to scanning for full and partial​ denture workflows. In the video above, he walks through his approach to scanning for dentures using the iTero Lumina™ scanner, which offers a 3× larger field of view for capturing more surface area in a single pass,¹ and is designed to scan up to 2× faster than the iTero Element™ 5D imaging system.²​

Watch the video to learn more and pick up a few techniques you can bring into your own denture workflow.



¹ The iTero Lumina™ intraoral scanner offers 3× larger field of view designed for more surface area capture enabling faster scanning. Compared to the field of view of the iTero Element™ 5D imaging system, when the iTero Lumina™ intraoral scanner's scanning distance is 12 mm. Data on file at Align Technology, as of November 15, 2023.
² Compared to the iTero Element™ 5D imaging system with tolerance AVE=±0.1 operating at a working distance from 0–20 mm. Data on file at Align Technology, as of November 15, 2023.
*The speaker featured has been compensated by Align Technology.

What happens when every patient gets scanned, not just the complex cases?A lack of common language can become a barrier ...
09/16/2026

What happens when every patient gets scanned, not just the complex cases?

A lack of common language can become a barrier to fully supporting patients as they make informed treatment decisions.

Dental therapist Cat Edney faced exactly this problem. And then something changed. After moving an underused iTero™ scanner into her own workflow, she began scanning every patient, not just the ones flagged for restorative work, and used the Align™ Oral Health Suite to walk patients through their own scans.

The impact was significant. In her own practice, Cat Edney explains how incorporating digital scanning into her workflow has helped support conversations with patients about their oral health and available treatment options. She reports that visual scan information helped support her discussions with patients.

She describes how she incorporated digital scanning more consistently into appropriate patient consultations.

Read Cat's full story: https://bit.ly/iTero_Digital-Workflows ​

08/19/2026

Denture workflows don't have to mean more appointments.

In a new video, Dr. Jennifer Bell shares how she has used a more connected digital workflow to reshape her denture workflow, consolidating appointments, making outcomes more predictable, and reducing the back-and-forth shipping that used to slow the process down.

In Dr. Bell’s experience, traditional denture cases often involve multiple in-office visits and a lot of back-and-forth with the lab, adding time for both the practice and the patient, and this has made all the difference to her workflows.

By capturing a PVS wash impression and scanning it directly with the iTero Lumina™ scanner, Dr. Bell says data can reach her lab within the hour, letting prototype work begin almost immediately.

What's been the biggest impact of digital workflows in your practice? Let us know in the comments.

Do you want scans that are faster or more accurate? We say, “why choose?” ​When it comes to intraoral scanning, faster c...
08/12/2026

Do you want scans that are faster or more accurate? We say, “why choose?” ​

When it comes to intraoral scanning, faster can sometimes mean cutting corners, and more accurate can often mean slowing down. The iTero Lumina™ scanner set out to prove those assumptions wrong. Powered by iTero™ Multi-Direct Capture technology, the iTero Lumina™ scanner captures a 3x larger field of view¹ and scans up to 2x faster,² while still delivering full-jaw accuracy that outperformed four competitor scanners in independent bench testing.³

Rather than trading precision for speed, it captures more data, in less time, at a level of accuracy that supports predictable, first-time restoration fit.⁴

Has the iTero Lumina™ scanner changed your expectations for intraoral scanning? Share your experience in the comments.

​

¹ The iTero Lumina™ intraoral scanner offers 3× larger field of view designed for more surface area capture enabling faster scanning. Compared to the field of view of the iTero™ Element 5D imaging system, when the iTero Lumina™ intraoral scanner's scanning distance is 12 mm. Data on file at Align Technology, as of November 15, 2023.​
² Compared to the iTero™ Element 5D imaging system with tolerance AVE=±0.1 operating at a working distance from 0–20 mm. Data on file at Align Technology, as of November 15, 2023.​
³ Based on bench testing conducted using ADA/ANSI 132 standard model simulating "long distance accuracy (full jaw measurement)" in July 2024. Tested scanners: iTero Lumina™; Trios 5; CS3800; Medit i700; Allied Star. Results: the accuracy of iTero Lumina™ was significantly higher than all four competitors, with a reduction of total error ranging from 0.11% to 0.46%. Data on file at Align Technology, as of August 26, 2024.​
⁴ Based on bench testing conducted in June 2024 according to ADA/ANSI 132 standard requirements for long distance full jaw accuracy (average error = 0.03%–0.24% < 0.25%), crown accuracy (average error = 0%–0.9% < 1%), and inlay accuracy specimens (average error = 0%–0.4% < 1%). Data on file at Align Technology, as of August 26, 2024.

Designing in-house starts with getting the right data at the right time.​For practices looking to bring digital design i...
08/05/2026

Designing in-house starts with getting the right data at the right time.​

For practices looking to bring digital design in-house, the iTero-exocad Connector™ is built to make that transition straightforward. Once a scan is captured, the information flows directly into exocad™ software, giving the design team everything they need to get started:

- Scans arrive directly into exocad software, cutting out extra steps between capture and design.¹​
- Designs can be reviewed and approved, or sent back with feedback before moving to production.​
- iTero™ NIRI technology (Near Infra-Red Imaging) brings enamel and dentin structure into view, supporting more aesthetic anterior restorations.

On average, teams using the iTero-exocad Connector™ report saving 4.5 minutes per case.²

A recent case study from Dr. Diana Tadros paints a full picture, following a complex aesthetic rehabilitation from initial scan through to final restoration. Read the full case study: https://bit.ly/iTero_Chairside-Aesthetic-Rehab

​

¹ Based on # of clicks required to move a case from the point of receiving an iTero™ scan from a doctor to the point of the scan being loaded in exocad's DentalDB when the user has MyiTero™ and exocad's DentalDB open. Data on file at Align Technology, as of December 17, 2020.​
² Based on a survey between December 2023 and February 2024 of n=20 dental lab technicians in NA, LATAM, APAC, and EMEA, working with exocad 3.2 Eleusis and the new iTero-exocad Connector™, who were presented with a level of agreement scale from strongly agree to strongly disagree with the following statement: "The iTero-exocad Connector™ saves me time when compared to the workflow without the iTero-exocad Connector." 4.5 minutes was the median of the responses. Data on file at Align Technology, as of February 27, 2024.

Address

2820 Orchard Parkway
San Jose, CA
95134

Telephone

+18005778767

Website

Alerts

Be the first to know and let us send you an email when iTero Intraoral Scanner posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Sponsored

Share

Category