Medisol PTY LTD

Call Directions Website

Medisol PTY LTD MEDISOL was founded in Sydney in 2018 with the aim of supplying high quality, reliable and cost-eff

Support should not end when the equipment is delivered.Medisol supports doctors, vein clinics and hospitals across Austr...
21/09/2026

Support should not end when the equipment is delivered.

Medisol supports doctors, vein clinics and hospitals across Australia and New Zealand throughout the product lifecycle:

• Product and configuration guidance
• Consumable and stock planning
• Practical assistance when reviewing clinical workflows
• Responsive local follow-up before, during and after purchase

Our focus is straightforward: reliable products, practical solutions and ongoing support for modern endovenous care.

Reviewing your current set-up or planning a new treatment room?

Talk to Medisol about your clinical and consumable requirements.

📧 [email protected]
🌐 https://zurl.co/Rel80

For healthcare professionals only. Product availability, indications and regulatory status may vary. Always refer to applicable product labelling and instructions for use.

Before the procedure, confirm the complete set-up.Before ordering or preparing consumables, review each component agains...
17/09/2026

Before the procedure, confirm the complete set-up.

Before ordering or preparing consumables, review each component against the selected platform and intended application:

• Energy platform — EVLA or EVRF
• Treatment device — compatible laser fibre or RF catheter
• Vascular access — introducer and guidewire compatibility
• Tumescence — pump and procedure-specific single-use tubing

Medisol brings these components together within a coordinated endovenous portfolio, supported locally across Australia and New Zealand.

Reviewing a new configuration or preparing your next order?

Contact Medisol to discuss your platform and procedural requirements.

📧 [email protected]
🌐 https://zurl.co/AUQWc

For healthcare professionals only. Product availability, indications and regulatory status may vary. Always refer to the applicable product labelling and instructions for use.

Controlled tumescent infiltration for modern endovenous workflows.The HK Surgical Klein Infiltration iTDD Pump supports ...
14/09/2026

Controlled tumescent infiltration for modern endovenous workflows.

The HK Surgical Klein Infiltration iTDD Pump supports tumescent delivery for endovenous vein ablation and phlebectomy.

Key features include:

• Digital adjustment from 1–600 RPM
• Maximum flow rate of up to 1000 mL/min
• Foot-pedal or touch control
• Compatible procedure-specific tubing options

Medisol provides the pump, single-use tubing and responsive local support to healthcare professionals across Australia and New Zealand.

Planning a new treatment room or reviewing your current infiltration set-up?

Contact us to discuss your requirements or request a demonstration.

📧 [email protected]
🌐 https://zurl.co/m0leh

For healthcare professionals only. Product availability, indications and regulatory status may vary. Always refer to the applicable product labelling and instructions for use.

Why does tumescence matter during EVLA and EVRF?In endovenous thermal ablation, ultrasound-guided perivenous tumescence ...
11/09/2026

Why does tumescence matter during EVLA and EVRF?

In endovenous thermal ablation, ultrasound-guided perivenous tumescence performs several important functions:

• Supports local anaesthesia and procedural comfort
• Compresses the target vein around the fibre or catheter
• Creates separation and a thermal buffer between the treated vein and adjacent tissue

Tumescence is therefore more than fluid delivery. Ultrasound-guided placement and confirmation form an important part of the thermal ablation workflow.

Medisol provides tumescent infiltration pumps, procedure-specific tubing and responsive support to healthcare professionals across Australia and New Zealand.

Explore the clinical workflow or discuss your infiltration set-up:

📧 [email protected]
🌐 https://zurl.co/ee5mn

For healthcare professionals only. This information does not replace professional training, patient-specific clinical judgement or the applicable instructions for use. Product availability, indications and regulatory status may vary.

1470 nm versus 1940 nm in EVLA: wavelength is only part of the equationThe 1470 nm and 1940 nm wavelengths both target w...
08/09/2026

1470 nm versus 1940 nm in EVLA: wavelength is only part of the equation

The 1470 nm and 1940 nm wavelengths both target water, but 1940 nm has greater water absorption. This can permit operation at lower power settings, depending on the laser system and procedural protocol.

Greater absorption, however, should not automatically be interpreted as clinical superiority.
Published literature indicates that thermal energy distribution differs between 1470 nm and 1940 nm, but there remains limited evidence of a clinically significant difference when treating incompetent saphenous veins.

Meaningful clinical comparison should consider:

• Vein diameter and wall thickness
• Applied power
• Linear endovenous energy density
• Fibre geometry
• Pullback technique
• Laser-to-fibre compatibility
• Long-term ablation outcomes—not only early postoperative findings

Medisol’s portable GBOX platform can be configured with 1470 nm, 1940 nm or combined 1470 + 1940 nm wavelengths, allowing clinicians to select a system appropriate to their workflow and intended application.

To discuss available configurations, contact [email protected].

For healthcare professionals only. Product availability, indications and regulatory status may vary. Refer to applicable product labelling and instructions for use.

🔵 Laser fibre safety: before and after useSafe fibre handling begins before laser connection—and continues after energy ...
07/09/2026

🔵 Laser fibre safety: before and after use

Safe fibre handling begins before laser connection—and continues after energy delivery.

Before use:

✅ Confirm that the sterile packaging is intact, unopened and within expiry.
✅ Inspect the fibre for visible damage, sharp bends or kinks.
✅ Check that the connector and distal quartz cap are clean and intact.
✅ Confirm compatibility between the fibre, laser system and applicable Instructions for Use.

After every procedure:

✅ Inspect the withdrawn fibre and introducer/sheath.
✅ Confirm that the fibre has been removed completely.
✅ Check that the distal tip and quartz cap remain intact.

This routine equipment-integrity check supports procedural documentation and complements the clinician’s procedural and post-treatment assessment.

Any unexpected finding should be managed according to the applicable Instructions for Use and the facility’s established protocol.

📩 Contact Medisol for radial and bare fibre compatibility information.

For appropriately trained healthcare professionals.

🔵 More configuration options within one compact platform.The Medisol G‑BOX is available in a 1470 nm single-wavelength c...
04/09/2026

🔵 More configuration options within one compact platform.

The Medisol G‑BOX is available in a 1470 nm single-wavelength configuration or as a dual 1470/980 nm system.

For EVLA workflows, Medisol also offers compatible radial and bare fibre options in 400 µm and 600 µm core diameters, with a 3 m fibre length.

The selected wavelength, fibre configuration and procedural parameters should be determined by the treating clinician according to the intended application, system compatibility and applicable Instructions for Use.

📩 Contact Medisol to discuss current G‑BOX configurations, compatible fibre options, availability or demonstration information.

For appropriately trained healthcare professionals. Always read the label and follow the applicable Instructions for Use.

CTA: Contact Medisol to configure your G‑BOX system.

🔵 What does active segment length mean?In a VeinCLEAR™ RF catheter, the active heating element is the section that deliv...
02/09/2026

🔵 What does active segment length mean?

In a VeinCLEAR™ RF catheter, the active heating element is the section that delivers thermal energy to the treatment site while relaying temperature information to the compatible generator.
Depending on the catheter configuration, VeinCLEAR heating-element lengths range from 1 cm to 7 cm.

A shorter or longer active segment should not be considered better in isolation. Catheter selection should account for the intended application, catheter profile, access configuration, generator compatibility and the treating clinician’s procedural plan.

Before use, confirm the selected catheter model is compatible with the VeinCLEAR™ V‑700, inspect the sterile packaging and review the applicable Instructions for Use.

📩 Contact Medisol for available catheter profiles, active-segment lengths and system compatibility.

For appropriately trained healthcare professionals.

CTA: Contact Medisol to confirm the appropriate VeinCLEAR configuration.

💧 1940 nm or 1470 nm? Why choose only one?As EVLA technology continues to evolve, 1940 nm is attracting increasing atten...
31/08/2026

💧 1940 nm or 1470 nm? Why choose only one?

As EVLA technology continues to evolve, 1940 nm is attracting increasing attention due to its higher absorption in water. Recent clinical studies suggest that it may achieve effective vein ablation using lower power and lower LEED, while maintaining excellent occlusion rates.¹²

At Medisol, we believe innovation should give physicians more choices—not more limitations.
That's why both our GBOX and VELAS laser platforms are available with a dual-wavelength configuration:

🔹 1470 nm – 15 W
🔹 1940 nm – 7 W

One platform. Two wavelengths. The flexibility to choose the technology that best fits your clinical preference and your patients' needs.

Because every procedure is different—and your laser platform should be ready for all of them.
📩 Contact Medisol Medical Solutions to learn more about our dual-wavelength EVLA systems.
¹ Setia A. et al. Lasers in Surgery and Medicine (2022).

² Nasser MM. et al. Journal of Vascular Surgery: Venous and Lymphatic Disorders (2025).

✨ AVOID THE TRAP: DEVICES THAT ONLY WORK WITH SPECIFIC CONSUMABLES ✨When purchasing medical equipment, we often focus on...
28/08/2026

✨ AVOID THE TRAP: DEVICES THAT ONLY WORK WITH SPECIFIC CONSUMABLES ✨

When purchasing medical equipment, we often focus on the initial cost, but there’s a sneaky trap in the medical device market that we tend to overlook: The device may seem affordable at first, but consumables can trap you in an expensive cycle!

❌ The device works only with consumables from a specific brand!
💰 Finding alternative consumables from different brands is nearly impossible, leaving the price completely in the hands of the vendor. These prices are often higher than necessary.
⏳ Over time, this situation reduces the profitability for clinics and doctors!

🚨 HOW TO AVOID THIS TRAP? We offer you open system, cost-effective, and innovative solutions. Medisol helps clinics and doctors break free from this trap by offering freedom of choice!

✅ Proven-effective, lightweight, and portable laser devices compatible with different consumables, used in over 100 countries worldwide!
✅ Freedom of choice without being dependent on a single brand!
✅ Cost-effective innovations that ensure long-term profitability!

📩 Get in touch with us for more information!
[email protected]


bu paylasimi güncelle ve uygun görsel bul yada üret

Address

Milner Road
Artarmon, NSW
2064

Telephone

+61424949796

Website

Alerts

Be the first to know and let us send you an email when Medisol PTY LTD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category