KOMEG Technology Ind Co.,Ltd

Call Directions Website Contact the business

KOMEG Technology Ind Co.,Ltd Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from KOMEG Technology Ind Co.,Ltd, No. 3, Industrial North 4th Road, Songshan Lake, Dongguan.

Founded in 1990, KOMEG is a global supplier of standard/custom environmental test chambers, including temperature & humidity, rapid-rate thermal cycle, walk-in, battery thermal, thermal shock, HAST, altitude test chambers, etc.

29/10/2026

Quality Is in the Details.

What goes into building a reliable environmental test chamber?

Sometimes, the answer is found in the details that are easy to overlook.

From internal airflow structures and door locking mechanisms to communication interfaces and electrical cabinet assembly, each component plays a role in the overall equipment design.

At , we pay attention to the details behind the finished product — including structural construction, component arrangement, and assembly workmanship.

Here is a closer look at the engineering details behind our environmental test chambers.

Because quality is not just what you see on the outside. It is also how the equipment is built on the inside.


Quality Is in the Details.What goes into building a reliable environmental test chamber?Sometimes, the answer is found...
29/10/2026

Quality Is in the Details.

What goes into building a reliable environmental test chamber?

Sometimes, the answer is found in the details that are easy to overlook.

From internal airflow structures and door locking mechanisms to communication interfaces and electrical cabinet assembly, each component plays a role in the overall equipment design.

At , we pay attention to the details behind the finished product — including structural construction, component arrangement, and assembly workmanship.

Here is a closer look at the engineering details behind our environmental test chambers.

Because quality is not just what you see on the outside. It is also how the equipment is built on the inside.


Rapid Temperature Changes Matter. But Test Conditions Matter More.In electronics reliability testing, rapid temperature ...
29/10/2026

Rapid Temperature Changes Matter. But Test Conditions Matter More.

In electronics reliability testing, rapid temperature cycling is used to expose potential weaknesses caused by repeated thermal stress.

However, a higher temperature change rate does not automatically mean a more effective test. The results depend on how the test profile matches the product, materials, and intended application.

When configuring a rapid temperature change test, engineers should consider four key factors:

✅ Temperature range: Does it represent the environmental conditions the product is expected to encounter?

✅ Ramp rate: Is the transition rate appropriate for the test standard and reliability objective?

✅ Specimen characteristics: How do component mass, materials, and thermal capacity affect the actual temperature response?

✅ Repeatability: Are temperature transitions, dwell times, and cycling conditions consistently controlled?

The KST Series Rapid Temperature Change Test Chambers are designed for controlled temperature cycling and environmental stress screening applications. The appropriate configuration depends on the required temperature profile, test load, and application-specific requirements.

The goal is not simply to change temperature faster. It is to apply repeatable thermal stress and generate meaningful data for reliability evaluation.

Explore the KOMEG KST Series:

🔗 https://www.komegtek.com/product/rapid-rate-thermal-cycle-chambers/

28/10/2026

One chamber. Two independently controlled test zones. More flexibility for battery testing.

When testing battery modules under changing temperature conditions, precise control and appropriate safety measures matter.

The Environmental Battery Test Chamber offers a temperature range of −40°C to +100°C, two independently controlled test zones, and configurable safety features to meet different testing requirements.

Designed for battery environmental testing, it gives engineers more flexibility in setting up their test programs.

📽️ Watch the video to explore the chamber's design and key features.

🔗 Explore the product:

https://www.komegtek.com/product/environmental-battery-test-chamber/

Smaller packages. Higher interconnect density. Bigger reliability risks. ⚠️ As semiconductor packaging scales down, Elec...
27/10/2026

Smaller packages. Higher interconnect density. Bigger reliability risks. ⚠️

As semiconductor packaging scales down, Electrochemical Migration (ECM) is becoming one of the most silent yet destructive failure mechanisms in advanced packaging.

When moisture, ionic residues, and an applied electric field intersect, metal-ion movement forms conductive filaments (dendrites)—leading to insulation degradation and sudden short circuits.

Testing for ECM isn't just about high temperatures; it requires a precise balance of:

1️⃣ Temperature & Humidity to accelerate moisture pe*******on
2️⃣ Continuous Electrical Bias to simulate real-world operating stress
3️⃣ Ionic Contamination Control to evaluate residue impact
4️⃣ Real-Time In-Situ Monitoring to catch subtle leakage current spikes early

High Accelerated Stress Test (HAST) chambers play a key role here, but getting reliable ECM data depends heavily on matching chamber performance with multi-channel biasing and precision monitoring systems.

At , we don't just provide environmental chambers—we help engineers configure precise test setups aligned with specific reliability goals (IEC, JESD22, AEC-Q100).

❓ How are you handling real-time bias monitoring during moisture acceleration tests? Let's discuss in the comments.

Learn more about KOMEG HAST Chambers & Testing Solutions:

https://www.komegtek.com/

A greener refrigerant. The same focus on reliable testing.As environmental regulations evolve, refrigerant selection is ...
23/10/2026

A greener refrigerant. The same focus on reliable testing.

As environmental regulations evolve, refrigerant selection is becoming an important consideration when investing in environmental test equipment.

CO₂ (R744) environmental test chamber uses a natural refrigerant with a Global Warming Potential (GWP) of just 1.

Designed for demanding temperature and humidity testing, the system offers a specified temperature range of −40°C to +180°C and humidity control from 10% to 98% RH, helping laboratories evaluate products under a wide range of climatic conditions.

Choosing a refrigerant is only part of the equation. Test performance, operating conditions, energy use, and long-term maintenance all matter when selecting the right chamber.

Sustainability and testing performance should be considered together.

Learn more about KOMEG CO₂ refrigeration technology:
komegtek.com/faq/new-co2-refrigeration-technology-for-environmental-test-chambers/

16/10/2026

KOMEG HAST-35 | Highly Accelerated Stress Test Chamber

Discover the KOMEG HAST-35 Highly Accelerated Stress Test Chamber, designed for high-temperature, high-humidity, and high-pressure testing of electronic components and semiconductor devices.

Key features include:

✅ SUS316 stainless steel pressure vessel
✅ Temperature range: 105°C to 135°C
✅ Standard mode: 100% relative humidity
✅ Humidity mode: 65%–100% relative humidity
✅ Gauge pressure up to 200 kPa

The HAST-35 helps engineers evaluate product reliability and identify potential weaknesses under accelerated stress conditions.

Learn more about KOMEG environmental testing solutions: https://www.komegtek.com

Not every temperature test needs an entire chamber.For semiconductor and electronic devices, sometimes the real challeng...
12/10/2026

Not every temperature test needs an entire chamber.

For semiconductor and electronic devices, sometimes the real challenge is applying rapid, controlled temperature changes directly to the DUT — without conditioning the entire test environment.

That's where the Temperature Forcing System comes in.

Designed for localized thermal testing, it delivers controlled hot and cold airflow directly to the device under test, helping engineers evaluate performance across demanding temperature conditions.

Key features include:

✅ -80°C to +225°C operating temperature range
✅ Temperature transitions in less than 10 seconds between -55°C and +125°C in either direction
✅ Continuously adjustable airflow from 5 to 24 SCFM
✅ Interchangeable nozzles and a movable articulated arm for flexible test setups
✅ No liquid nitrogen or CO₂ auxiliary cooling required

Suitable for semiconductor ICs, electronic components, PCBs, and other devices that require targeted thermal evaluation.

For engineers working on device characterization and reliability testing, a more localized approach can offer greater flexibility when evaluating temperature-sensitive components.

Explore the KOMEG Temperature Forcing System:
👉 https://www.komegtek.com/product/temperature-forcing-system/

We're heading to Shenzhen! Join KOMEG at the 2026 Bay Area Semiconductor Industry Ecosystem Expo.Come meet our team, dis...
09/10/2026

We're heading to Shenzhen! Join KOMEG at the 2026 Bay Area Semiconductor Industry Ecosystem Expo.
Come meet our team, discuss your environmental testing needs, and explore solutions for semiconductor reliability testing.
📅 October 14–16, 2026
📍 Shenzhen Convention & Exhibition Center (Futian)
📌 Hall 5 · Booth 5F09
We look forward to seeing you there!

National Day Holiday Notice will observe China's National Day holiday from October 1 to October 5, 2026, and resume nor...
30/09/2026

National Day Holiday Notice

will observe China's National Day holiday from October 1 to October 5, 2026, and resume normal work on October 6.

During the holiday, responses may be a little slower than usual. If you have an inquiry about environmental test chambers, a quotation request, an order, or a technical question, please feel free to leave us a message. Our team will follow up as soon as possible.

We sincerely appreciate the trust and support of our customers, distributors, and partners around the world.

National Day is a time to slow down, recharge, and enjoy meaningful moments with family and loved ones.

Wishing everyone a happy and relaxing National Day, and wishing China continued prosperity and growth.

Address

No. 3, Industrial North 4th Road, Songshan Lake
Dongguan
523808

Telephone

+8676923321820

Website

,

Alerts

Be the first to know and let us send you an email when KOMEG Technology Ind Co.,Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KOMEG Technology Ind Co.,Ltd:

Shortcuts

Share

Other Dongguan health & beauty businesses

Show All