Gammatom srl

22/10/2026

Almost two weeks have passed since CPHI Milan came to an end, and now that we are back to our daily work, we feel it is only right to take a moment to express our sincere thanks.

Three intense days filled with meetings, valuable exchanges and meaningful conversations.

For Gammatom, taking part in an event such as CPHI means much more than simply exhibiting at a trade show.

It means listening closely to the needs of a complex and highly specialized industry such as pharma, engaging with manufacturers and international partners, and confirming just how increasingly important sterilization has become as an integral part of process quality and the pharmaceutical supply chain.

Throughout the event, we had the opportunity to explore key topics including:

- treatment reliability
- compatibility between products, materials and packaging
- traceability
- service continuity
- the importance of technical dialogue between manufacturers and their sterilization partner

We would like to thank everyone who visited our stand and shared their needs, questions, experiences and perspectives with us.

It is through these conversations that strong professional relationships are built and long-term partnerships begin.

Because, particularly in the pharmaceutical industry, **the value of a technology is also measured by the quality of the partner behind it.**

Thank you from the entire Gammatom team.

09/10/2026

Two materials. The same dose. Not necessarily the same response.

In gamma sterilization, radiation dose is a critical parameter. But it is not the only factor to consider. Even materials that appear similar can respond differently to gamma irradiation.

Some polymers may undergo colour changes, while others may experience alterations in their physical or mechanical properties. These responses depend on material composition, additives, absorbed dose and the specific characteristics of the product.

This is why material compatibility is an essential consideration when assessing a sterilization process.

At Gammatom, our expertise in gamma irradiation goes hand in hand with a thorough understanding of product characteristics and the specific requirements of different industries. Because the objective is not simply to deliver the required dose.

It is to contribute to a sterilization process that preserves the performance and integrity required of the product.

www.gammatom.it

25/09/2026

In the pharmaceutical industry, sterilization is not simply the final step of a process. It is part of the process itself.
When quality, safety, compliance, production continuity and supply chain reliability are at stake, every decision needs to be carefully considered.

This is also why Gammatom will be at CPHI Milan 2026 from 6 to 8 October.
For us, taking part in CPHI means being present in one of the most qualified international environments for the pharmaceutical industry: a place where manufacturers, technologies, materials, packaging, quality and processes come together.
And this is exactly where sterilization shows its full strategic value.
Behind every gamma irradiation treatment, there is much more than a service.

There are essential technical questions:
What is the appropriate dose?
How will the product respond?
How will the materials behave?
What impact do density, geometry and load configuration have?
How should packaging be assessed?
How can repeatability, control and traceability be ensured?
These are the conversations we want to have at CPHI.

Gammatom brings extensive experience in gamma irradiation technology, supporting companies in the evaluation of different products, materials, configurations and process requirements.

For pharmaceutical manufacturers, visiting our stand is an opportunity to explore a proven technology and understand how it can be effectively integrated into their industrial processes.

But it is also an opportunity to discuss something equally important:
choosing a reliable partner for a critical stage of the supply chain.
Because in pharma, it is not only about performing a treatment.
It is about being able to rely on a partner who is competent, consistent, traceable and prepared to understand the specific requirements behind every product and every batch.

This is why we will be at CPHI Milan.
To meet companies, listen to their needs, share technical expertise and demonstrate the value of having a specialized Italian sterilization partner within your supply chain.

Gammatom – CPHI Milan 2026
6–8 October 2026
Stand 8F100

18/09/2026

Every treatment has a beginning and an end. A collaboration, however, can go much further.

We see it when a customer comes back to us.
When they involve us with a new product.
When they ask us to discuss different materials, packaging, densities or requirements.

That is when we realise we have built something that goes beyond a single sterilization cycle.

For Gammatom, every project is also an opportunity to gain a deeper understanding of our customers’ products, understand their needs and share a journey built on care, continuity and reliability.

Because technology is essential.
But it is trust, built over time, that turns a service into a long-lasting partnership.

11/09/2026

25/06/2026

Why follow a page about gamma irradiation sterilization?

Because not all industrial content has to sell something. Some content should help people understand better.

In many regulated supply chains, sterilization is not a secondary step. It is a technical decision that affects safety, compliance, materials, packaging, timing, responsibility and supply chain continuity.

And yet, it is often discussed too little. Or only when a problem occurs. We want to do the opposite. We want to use this page to share expertise, method and industrial culture.

We talk about what it really means to control a process. Why dose is never just a detail. How materials and density can influence treatment. About traceability, validation, documentation and repeatability. About responsibility across the entire supply chain.

Because safety does not begin at the end. It is built before.

We are an Italian company with long-standing experience in sterilization through gamma irradiation.

But the point is not only to explain who we are.
That is why we have created a useful space for those who work every day with sensitive, regulated and critical products.

If you are a quality manager, R&D manager, buyer, production manager, regulatory affairs specialist, or a professional in the medical, pharmaceutical, cosmetic or packaging industries, follow this page.

You will not find slogans.
You will find informative and technical content: clear, concrete and applicable.

Safety is not one-size-fits-all.
It is a process to be governed.

19/06/2026

In the language of innovation, we often confuse what is new with what is better.

But in industry, especially when dealing with delicate or regulated products, value does not lie in novelty alone.

It lies in accumulated knowledge. In process predictability. In the ability to manage different materials, volumes and applications. In the experience built batch after batch.

Gamma irradiation sterilization is a mature technology.

And precisely for this reason, it continues to play a central role in many supply chains: because it is well understood, validated, applicable across different sectors and fully integrable into industrial processes.

Today, we can say with confidence that this is not a technology to be described with nostalgia. It is a technology to be assessed with realism: when the product, the material and the context require it, gamma sterilization remains a solid choice.

At Gammatom, we bring this expertise into an Italian industrial history built on applications, continuity and specialization.

Some technologies do not need to prove they are new. They need to prove they are necessary.

11/06/2026

Some industrial processes rarely make it into the spotlight.

They don’t have the visibility of the finished product.
They are not part of the design narrative.
They don’t appear in the commercial promise.

And yet, they are decisive.

Gamma irradiation sterilization belongs to this category: a silent technology, integrated into the supply chains of the medical, pharmaceutical, cosmetic and industrial sectors.

It is not there to make a product more “marketable”.
It is there to make it ready for its real-world use.

Behind a device, a component, a packaging solution or a raw material, there is often a step that the end customer never sees — but one that can determine whether that product is ready to enter the market.

This is where we work: in the space of essential technologies, often invisible, yet indispensable to the continuity of supply chains.

Because in many industries, what remains unseen is precisely what allows everything else to function.

Gammatom: The invisible technology behind essential products.

25/05/2026

What is left on your product after the sterilization process?
If you rely on traditional chemical methods, the answer often involves long degassing times and the latent risk of micro-residues.

At Gammatom, the answer is simple: absolutely nothing.

Gamma irradiation is pure physics, not chemistry. The energy penetrates the products and their sealed packaging, eliminates the microbial load, and vanishes instantly.

- Zero chemical residues on the product or in the environment.
- Zero quarantine times for gas removal.
- The batch is immediately ready for distribution.

Being a truly sustainable company in the pharma sector doesn't mean doing "green" marketing. It means integrating a smarter, safer innovation that respects the planet we call home.

For over fifty years, we have been turning advanced physics into your ultimate guarantee of purity. Without compromise.

www.gammatom.it

15/05/2026

We don’t just sterilize products. We protect responsibilities.

Behind every medical device, pharmaceutical component or cosmetic product, there is a very real responsibility: ensuring that it reaches the customer safe, compliant and intact.

Gamma irradiation is a well-established technology because it allows products to be treated in their final packaging, with no chemical residues and with high pe*******on capability.

But the real value does not lie in the technology alone. It lies in the ability to control the process: dose, material, packaging, density, load configuration and traceability.

At Gammatom, gamma irradiation means expertise applied to the customer’s product. Not a standard step. A technical choice for safety.

Gammatom: Safety, control, responsibility.