02/03/2026
How to Use a Fire Extinguisher
Before using a fire extinguisher:
✔ Activate the nearest fire alarm
✔ Call the emergency response team / security
✔ Ensure patients are protected or relocated if necessary
✔ Confirm the fire is small and manageable (e.g., waste bin, small equipment fire)
✔ Keep an exit route behind you
Follow the PASS Method
P – Pull the safety pin to unlock the extinguisher.
A – Aim the nozzle at the base of the fire, especially around electrical panels, medical equipment, or waste containers.
S – Squeeze the handle/lever to discharge the extinguishing agent.
S – Sweep side to side at the base until the fire is fully out.
Important Healthcare Safety Reminders!
DO NOT USE WATER ON ELECTRICAL OR MEDICAL EQUIPMENT FIRES!
For oxygen-enriched areas (e.g., near oxygen tanks or ventilators),
>Evacuate immediately and shut off oxygen supply if trained and safe to do so.
>Prioritize patient safety and evacuation over fire suppression.
>Never leave non-ambulatory patients unattended during evacuation.
𝐈𝐟 𝐭𝐡𝐞 𝐟𝐢𝐫𝐞 𝐜𝐚𝐧𝐧𝐨𝐭 𝐛𝐞 𝐜𝐨𝐧𝐭𝐫𝐨𝐥𝐥𝐞𝐝 𝐰𝐢𝐭𝐡𝐢𝐧 𝐬𝐞𝐜𝐨𝐧𝐝𝐬, 𝐞𝐯𝐚𝐜𝐮𝐚𝐭𝐞 𝐚𝐧𝐝 𝐜𝐥𝐨𝐬𝐞 𝐝𝐨𝐨𝐫𝐬 𝐭𝐨 𝐜𝐨𝐧𝐭𝐚𝐢𝐧 𝐬𝐦𝐨𝐤𝐞.
After Extinguishing
* Report immediately to the Incident Commander or Safety Officer.
* Do not reuse discharged equipment.
* Document the incident as per hospital policy.